Installation of fiber optic components has become an unavoidable task today and it adds to the overall improvement of the connection system in any residential or commercial place. Experts share that a few tips must be considered by a person when installing different fiber optic cables.
It is not just important for safety & security purposes but it also helps in managing a network of components in an easy manner. Here are a few tips that one must consider when installing fiber optic cables:
Avoid Bends
The very first tip that one should follow on this subject is to avoid bending a fiber optic cable or another component too much. It is important for the proper functioning of a fiber optic cable as it works fine when it is kept straight during its installation. There is a bend radius specified with every brand of fiber optic cable and one must follow the limit of bending mentioned in the form of a bend radius.
Use of Rack Mount Fiber Enclosure
The next thing that one must keep in mind is the use of rack mount fiber enclosure for offering the flexible connectivity of fiber cables. A rack mount enclosure ensures a convenient termination point while installing fiber optic cables. It is really crucial for ensuring robust and flexible connectivity of fiber cables or other components with the use of adapter panels or fiber cassettes.
Prevent the Contamination of End Face
The end face of the fiber connector is a sensitive area where the chances of damage are very high. Protective caps on it must not be removed till the time of plugging it into any equipment. It is also necessary to clean it properly before and after the plugging.
Consider Maximum Vertical Rise
While installing a fiber optic cable, it is necessary to consider its maximum vertical rise. It depends on a cable’s tensile strength and weight. All guidelines related to vertical installation must be considered properly to install a fiber optic cable without any support. It is imperative for the proper working and security of a fiber optics cable.
Don’t Pull it Too Hard
It is necessary not to pull a fiber optic cable too hard and one must consider its tensile strength while doing so. Pulling it too hard would damage it and it would affect its performance in any connectivity system. Additionally, a fiber optic cable must not be pinched for ensuring its proper functioning.